Version: Next

ADR 063: Core Module API

Changelog

2022-08-18 First Draft
2022-12-08 First Draft
2023-01-24 Updates

Status

ACCEPTED Partially Implemented

Abstract

A new core API is proposed as a way to develop cosmos-sdk applications that will eventually replace the existing AppModule and sdk.Context frameworks a set of core services and extension interfaces. This core API aims to:

be simpler
more extensible
more stable than the current framework
enable deterministic events and queries,
support event listeners
ADR 033: Protobuf-based Inter-Module Communication clients.

Context

Historically modules have exposed their functionality to the framework via the AppModule and AppModuleBasic interfaces which have the following shortcomings:

both AppModule and AppModuleBasic need to be defined and registered which is counter-intuitive
apps need to implement the full interfaces, even parts they don't need (although there are workarounds for this),
interface methods depend heavily on unstable third party dependencies, in particular Comet,
legacy required methods have littered these interfaces for far too long

In order to interact with the state machine, modules have needed to do a combination of these things:

get store keys from the app
call methods on sdk.Context which contains more or less the full set of capability available to modules.

By isolating all the state machine functionality into sdk.Context, the set of functionalities available to modules are tightly coupled to this type. If there are changes to upstream dependencies (such as Comet) or new functionalities are desired (such as alternate store types), the changes need impact sdk.Context and all consumers of it (basically all modules). Also, all modules now receive context.Context and need to convert these to sdk.Context's with a non-ergonomic unwrapping function.

Any breaking changes to these interfaces, such as ones imposed by third-party dependencies like Comet, have the side effect of forcing all modules in the ecosystem to update in lock-step. This means it is almost impossible to have a version of the module which can be run with 2 or 3 different versions of the SDK or 2 or 3 different versions of another module. This lock-step coupling slows down overall development within the ecosystem and causes updates to components to be delayed longer than they would if things were more stable and loosely coupled.

Decision

The core API proposes a set of core APIs that modules can rely on to interact with the state machine and expose their functionalities to it that are designed in a principled way such that:

tight coupling of dependencies and unrelated functionalities is minimized or eliminated
APIs can have long-term stability guarantees
the SDK framework is extensible in a safe and straightforward way

The design principles of the core API are as follows:

everything that a module wants to interact with in the state machine is a service
all services coordinate state via context.Context and don't try to recreate the "bag of variables" approach of sdk.Context
all independent services are isolated in independent packages with minimal APIs and minimal dependencies
the core API should be minimalistic and designed for long-term support (LTS)
a "runtime" module will implement all the "core services" defined by the core API and can handle all module functionalities exposed by core extension interfaces
other non-core and/or non-LTS services can be exposed by specific versions of runtime modules or other modules following the same design principles, this includes functionality that interacts with specific non-stable versions of third party dependencies such as Comet
the core API doesn't implement any functionality, it just defines types
go stable API compatibility guidelines are followed: https://go.dev/blog/module-compatibility

A "runtime" module is any module which implements the core functionality of composing an ABCI app, which is currently handled by BaseApp and the ModuleManager. Runtime modules which implement the core API are intentionally separate from the core API in order to enable more parallel versions and forks of the runtime module than is possible with the SDK's current tightly coupled BaseApp design while still allowing for a high degree of composability and compatibility.

Modules which are built only against the core API don't need to know anything about which version of runtime, BaseApp or Comet in order to be compatible. Modules from the core mainline SDK could be easily composed with a forked version of runtime with this pattern.

This design is intended to enable matrices of compatible dependency versions. Ideally a given version of any module is compatible with multiple versions of the runtime module and other compatible modules. This will allow dependencies to be selectively updated based on battle-testing. More conservative projects may want to update some dependencies slower than more fast moving projects.

Core Services

The following "core services" are defined by the core API. All valid runtime module implementations should provide implementations of these services to modules via both dependency injection and manual wiring. The individual services described below are all bundled in a convenient appmodule.Service "bundle service" so that for simplicity modules can declare a dependency on a single service.

Store Services

Store services will be defined in the cosmossdk.io/core/store package.

The generic store.KVStore interface is the same as current SDK KVStore interface. Store keys have been refactored into store services which, instead of expecting the context to know about stores, invert the pattern and allow retrieving a store from a generic context. There are three store services for the three types of currently supported stores - regular kv-store, memory, and transient:

type KVStoreService interface {
    OpenKVStore(context.Context) KVStore
}

type MemoryStoreService interface {
    OpenMemoryStore(context.Context) KVStore
}
type TransientStoreService interface {
    OpenTransientStore(context.Context) KVStore
}

Modules can use these services like this:

func (k msgServer) Send(ctx context.Context, msg *types.MsgSend) (*types.MsgSendResponse, error) {
    store := k.kvStoreSvc.OpenKVStore(ctx)
}

Just as with the current runtime module implementation, modules will not need to explicitly name these store keys, but rather the runtime module will choose an appropriate name for them and modules just need to request the type of store they need in their dependency injection (or manual) constructors.

Event Service

The event Service will be defined in the cosmossdk.io/core/event package.

The event Service allows modules to emit typed and legacy untyped events:

package event

type Service interface {
  // EmitProtoEvent emits events represented as a protobuf message (as described in ADR 032).
  //
  // Callers SHOULD assume that these events may be included in consensus. These events
  // MUST be emitted deterministically and adding, removing or changing these events SHOULD
  // be considered state-machine breaking.
  EmitProtoEvent(ctx context.Context, event protoiface.MessageV1) error

  // EmitKVEvent emits an event based on an event and kv-pair attributes.
  //
  // These events will not be part of consensus and adding, removing or changing these events is
  // not a state-machine breaking change.
  EmitKVEvent(ctx context.Context, eventType string, attrs ...KVEventAttribute) error

  // EmitProtoEventNonConsensus emits events represented as a protobuf message (as described in ADR 032), without
  // including it in blockchain consensus.
  //
  // These events will not be part of consensus and adding, removing or changing events is
  // not a state-machine breaking change.
  EmitProtoEventNonConsensus(ctx context.Context, event protoiface.MessageV1) error
}

Typed events emitted with EmitProto should be assumed to be part of blockchain consensus (whether they are part of the block or app hash is left to the runtime to specify).

Events emitted by EmitKVEvent and EmitProtoEventNonConsensus are not considered to be part of consensus and cannot be observed by other modules. If there is a client-side need to add events in patch releases, these methods can be used.

Logger

A logger (cosmossdk.io/log) must be supplied using depinject, and will be made available for modules to use via depinject.In. Modules using it should follow the current pattern in the SDK by adding the module name before using it.

type ModuleInputs struct {
  depinject.In

  Logger log.Logger
}

func ProvideModule(in ModuleInputs) ModuleOutputs {
  keeper := keeper.NewKeeper(
    in.logger,
  )
}

func NewKeeper(logger log.Logger) Keeper {
  return Keeper{
    logger: logger.With(log.ModuleKey, "x/"+types.ModuleName),
  }
}

### Core `AppModule` extension interfaces


Modules will provide their core services to the runtime module via extension interfaces built on top of the
`cosmossdk.io/core/appmodule.AppModule` tag interface. This tag interface requires only two empty methods which
allow `depinject` to identify implementers as `depinject.OnePerModule` types and as app module implementations:

```go
type AppModule interface {
  depinject.OnePerModuleType

  // IsAppModule is a dummy method to tag a struct as implementing an AppModule.
  IsAppModule()
}

Other core extension interfaces will be defined in cosmossdk.io/core should be supported by valid runtime implementations.

`MsgServer` and `QueryServer` registration

MsgServer and QueryServer registration is done by implementing the HasServices extension interface:

type HasServices interface {
    AppModule

    RegisterServices(grpc.ServiceRegistrar)
}

Because of the cosmos.msg.v1.service protobuf option, required for Msg services, the same ServiceRegistrar can be used to register both Msg and query services.

Genesis

The genesis Handler functions - DefaultGenesis, ValidateGenesis, InitGenesis and ExportGenesis - are specified against the GenesisSource and GenesisTarget interfaces which will abstract over genesis sources which may be a single JSON object or collections of JSON objects that can be efficiently streamed.

// GenesisSource is a source for genesis data in JSON format. It may abstract over a
// single JSON object or separate files for each field in a JSON object that can
// be streamed over. Modules should open a separate io.ReadCloser for each field that
// is required. When fields represent arrays they can efficiently be streamed
// over. If there is no data for a field, this function should return nil, nil. It is
// important that the caller closes the reader when done with it.
type GenesisSource = func(field string) (io.ReadCloser, error)

// GenesisTarget is a target for writing genesis data in JSON format. It may
// abstract over a single JSON object or JSON in separate files that can be
// streamed over. Modules should open a separate io.WriteCloser for each field
// and should prefer writing fields as arrays when possible to support efficient
// iteration. It is important the caller closers the writer AND checks the error
// when done with it. It is expected that a stream of JSON data is written
// to the writer.
type GenesisTarget = func(field string) (io.WriteCloser, error)

All genesis objects for a given module are expected to conform to the semantics of a JSON object. Each field in the JSON object should be read and written separately to support streaming genesis. The ORM and collections both support streaming genesis and modules using these frameworks generally do not need to write any manual genesis code.

To support genesis, modules should implement the HasGenesis extension interface:

type HasGenesis interface {
    AppModule

    // DefaultGenesis writes the default genesis for this module to the target.
    DefaultGenesis(GenesisTarget) error

    // ValidateGenesis validates the genesis data read from the source.
    ValidateGenesis(GenesisSource) error

    // InitGenesis initializes module state from the genesis source.
    InitGenesis(context.Context, GenesisSource) error

    // ExportGenesis exports module state to the genesis target.
    ExportGenesis(context.Context, GenesisTarget) error
}

Pre Blockers

Modules that have functionality that runs before BeginBlock and should implement the HasPreBlocker interfaces:

type HasPreBlocker interface {
  AppModule
  PreBlock(context.Context) error
}

Begin and End Blockers

Modules that have functionality that runs before transactions (begin blockers) or after transactions (end blockers) should implement the HasBeginBlocker and/or HasEndBlocker interfaces:

type HasBeginBlocker interface {
  AppModule
  BeginBlock(context.Context) error
}

type HasEndBlocker interface {
  AppModule
  EndBlock(context.Context) error
}

The BeginBlock and EndBlock methods will take a context.Context, because:

most modules don't need Comet information other than BlockInfo so we can eliminate dependencies on specific Comet versions
for the few modules that need Comet block headers and/or return validator updates, specific versions of the runtime module will provide specific functionality for interacting with the specific version(s) of Comet supported

In order for BeginBlock, EndBlock and InitGenesis to send back validator updates and retrieve full Comet block headers, the runtime module for a specific version of Comet could provide services like this:

type ValidatorUpdateService interface {
    SetValidatorUpdates(context.Context, []abci.ValidatorUpdate)
}

Header Service defines a way to get header information about a block. This information is generalized for all implementations:

type Service interface {
    HeaderInfo(context.Context) Info
}

type Info struct {
    Height int64      // Height returns the height of the block
    Hash []byte       // Hash returns the hash of the block header
    Time time.Time    // Time returns the time of the block
    ChainID string    // ChainId returns the chain ID of the block
}

Comet Service provides a way to get comet specific information:

type Service interface {
    GetCometInfo(context.Context) Info
}

type CometInfo struct {
  Evidence []abci.Misbehavior // Misbehavior returns the misbehavior of the block
    // ValidatorsHash returns the hash of the validators
    // For Comet, it is the hash of the next validators
    ValidatorsHash []byte
    ProposerAddress []byte            // ProposerAddress returns the address of the block proposer
    DecidedLastCommit abci.CommitInfo // DecidedLastCommit returns the last commit info
}

If a user would like to provide a module other information they would need to implement another service like:

type RollKit Interface {
  ...
}

We know these types will change at the Comet level and that also a very limited set of modules actually need this functionality, so they are intentionally kept out of core to keep core limited to the necessary, minimal set of stable APIs.

Remaining Parts of AppModule

The current AppModule framework handles a number of additional concerns which aren't addressed by this core API. These include:

gas
block headers
upgrades
registration of gogo proto and amino interface types
cobra query and tx commands
gRPC gateway
crisis module invariants
simulations

Additional AppModule extension interfaces either inside or outside of core will need to be specified to handle these concerns.

In the case of gogo proto and amino interfaces, the registration of these generally should happen as early as possible during initialization and in ADR 057: App Wiring, protobuf type registration
happens before dependency injection (although this could alternatively be done dedicated DI providers).

gRPC gateway registration should probably be handled by the runtime module, but the core API shouldn't depend on gRPC gateway types as 1) we are already using an older version and 2) it's possible the framework can do this registration automatically in the future. So for now, the runtime module should probably provide some sort of specific type for doing this registration ex:

type GrpcGatewayInfo struct {
    Handlers []GrpcGatewayHandler
}

type GrpcGatewayHandler func(ctx context.Context, mux *runtime.ServeMux, client QueryClient) error

which modules can return in a provider:

func ProvideGrpcGateway() GrpcGatewayInfo {
    return GrpcGatewayinfo {
        Handlers: []Handler {types.RegisterQueryHandlerClient}
    }
}

Crisis module invariants and simulations are subject to potential redesign and should be managed with types defined in the crisis and simulation modules respectively.

Extension interface for CLI commands will be provided via the cosmossdk.io/client/v2 module and its autocli framework.

Example Usage

Here is an example of setting up a hypothetical foo v2 module which uses the ORM for its state management and genesis.

type Keeper struct {
    db orm.ModuleDB
    evtSrv event.Service
}

func (k Keeper) RegisterServices(r grpc.ServiceRegistrar) {
  foov1.RegisterMsgServer(r, k)
  foov1.RegisterQueryServer(r, k)
}

func (k Keeper) BeginBlock(context.Context) error {
    return nil
}

func ProvideApp(config *foomodulev2.Module, evtSvc event.EventService, db orm.ModuleDB) (Keeper, appmodule.AppModule){
    k := &Keeper{db: db, evtSvc: evtSvc}
    return k, k
}

Runtime Compatibility Version

The core module will define a static integer var, cosmossdk.io/core.RuntimeCompatibilityVersion, which is a minor version indicator of the core module that is accessible at runtime. Correct runtime module implementations should check this compatibility version and return an error if the current RuntimeCompatibilityVersion is higher than the version of the core API that this runtime version can support. When new features are added to the core module API that runtime modules are required to support, this version should be incremented.

Runtime Modules

The initial runtime module will simply be created within the existing github.com/cosmos/cosmos-sdk go module under the runtime package. This module will be a small wrapper around the existing BaseApp, sdk.Context and module manager and follow the Cosmos SDK's existing 0-based versioning. To move to semantic versioning as well as runtime modularity, new officially supported runtime modules will be created under the cosmossdk.io/runtime prefix. For each supported consensus engine a semantically-versioned go module should be created with a runtime implementation for that consensus engine. For example:

cosmossdk.io/runtime/comet
cosmossdk.io/runtime/comet/v2
cosmossdk.io/runtime/rollkit
etc.

These runtime modules should attempt to be semantically versioned even if the underlying consensus engine is not. Also, because a runtime module is also a first class Cosmos SDK module, it should have a protobuf module config type. A new semantically versioned module config type should be created for each of these runtime module such that there is a 1:1 correspondence between the go module and module config type. This is the same practice should be followed for every semantically versioned Cosmos SDK module as described in ADR 057: App Wiring.

Currently, github.com/cosmos/cosmos-sdk/runtime uses the protobuf config type cosmos.app.runtime.v1alpha1.Module. When we have a standalone v1 comet runtime, we should use a dedicated protobuf module config type such as cosmos.runtime.comet.v1.Module1. When we release v2 of the comet runtime (cosmossdk.io/runtime/comet/v2) we should have a corresponding cosmos.runtime.comet.v2.Module protobuf type.

In order to make it easier to support different consensus engines that support the same core module functionality as described in this ADR, a common go module should be created with shared runtime components. The easiest runtime components to share initially are probably the message/query router, inter-module client, service register, and event router. This common runtime module should be created initially as the cosmossdk.io/runtime/common go module.

When this new architecture has been implemented, the main dependency for a Cosmos SDK module would be cosmossdk.io/core and that module should be able to be used with any supported consensus engine (to the extent that it does not explicitly depend on consensus engine specific functionality such as Comet's block headers). An app developer would then be able to choose which consensus engine they want to use by importing the corresponding runtime module. The current BaseApp would be refactored into the cosmossdk.io/runtime/comet module, the router infrastructure in baseapp/ would be refactored into cosmossdk.io/runtime/common and support ADR 033, and eventually a dependency on github.com/cosmos/cosmos-sdk would no longer be required.

In short, modules would depend primarily on cosmossdk.io/core, and each cosmossdk.io/runtime/{consensus-engine} would implement the cosmossdk.io/core functionality for that consensus engine.

On additional piece that would need to be resolved as part of this architecture is how runtimes relate to the server. Likely it would make sense to modularize the current server architecture so that it can be used with any runtime even if that is based on a consensus engine besides Comet. This means that eventually the Comet runtime would need to encapsulate the logic for starting Comet and the ABCI app.

Testing

A mock implementation of all services should be provided in core to allow for unit testing of modules without needing to depend on any particular version of runtime. Mock services should allow tests to observe service behavior or provide a non-production implementation - for instance memory stores can be used to mock stores.

For integration testing, a mock runtime implementation should be provided that allows composing different app modules together for testing without a dependency on runtime or Comet.

Consequences

Backwards Compatibility

Early versions of runtime modules should aim to support as much as possible modules built with the existing AppModule/sdk.Context framework. As the core API is more widely adopted, later runtime versions may choose to drop support and only support the core API plus any runtime module specific APIs (like specific versions of Comet).

The core module itself should strive to remain at the go semantic version v1 as long as possible and follow design principles that allow for strong long-term support (LTS).

Older versions of the SDK can support modules built against core with adaptors that convert wrap core AppModule implementations in implementations of AppModule that conform to that version of the SDK's semantics as well as by providing service implementations by wrapping sdk.Context.

Positive

better API encapsulation and separation of concerns
more stable APIs
more framework extensibility
deterministic events and queries
event listeners
inter-module msg and query execution support
more explicit support for forking and merging of module versions (including runtime)

Negative

Neutral

modules will need to be refactored to use this API
some replacements for AppModule functionality still need to be defined in follow-ups (type registration, commands, invariants, simulations) and this will take additional design work

Further Discussions

gas
block headers
upgrades
registration of gogo proto and amino interface types
cobra query and tx commands
gRPC gateway
crisis module invariants
simulations

ADR 063: Core Module API

Changelog​

Status​

Abstract​

Context​

Decision​

Core Services​

Store Services​

Event Service​

Logger​

MsgServer and QueryServer registration​

Genesis​

Pre Blockers​

Begin and End Blockers​

Remaining Parts of AppModule​

Example Usage​

Runtime Compatibility Version​

Runtime Modules​

Testing​

Consequences​

Backwards Compatibility​

Positive​

Negative​

Neutral​

Further Discussions​

References​